First of all, many thanks for the pointers that you have generiously shared with me
I am trying to get the branch office's streamyx DSL modem to work
I have read through the instructions from many other threads and set up the modem.
Now, I can access the modem from a PC, via LAN, and the following lights on the modem are green colour -
* Power Light
* LAN Light
* DSL Light
* Internet Light
None of them flashes, they just stay solid green
Does that mean the modem is working?
For some reasons, I still can't access the Net from a PC which connects to the modem
Enclose please find the info I copied from the modem, if you see anything that is wrong below, please tell me what is wrong and how to change it
Thank you !
---------------8<----------------------------------------------------
Board ID: DSL-2640B
Software Version: GE_1.07
Bootloader (CFE) Version: 1.0.37-5.12
Wireless Driver Version: 5.10.85.0.cpe4.402.1
Line Rate - Upstream (Kbps): 512
Line Rate - Downstream (Kbps): 1024
SNR Margin - Upstream (0.1 dB): 250
SNR Margin - Downstream (0.1 dB): 350
Attenuation - Upstream (0.1 dB): 25
Attenuation - Downstream (0.1 dB): 45
LAN IPv4 Address: 192.168.1.1
Default Gateway: 2.1.1.73
Premary DNS Server: blank
Secondary DNS Server: blank
LAN IPv6 Address: fe80::1
Default IPv6 Gateway: blank
Primary IPv6 DNS Server: 0.0.0.0
Secondary IPv6 DNS Server: 0.0.0.0
Date/Time: Sat Jan 1 00.02.44.2000
WAN Info
Interface: ppp0
Description: pppoe_0_0_35
Type: PPPoE
VlanMuxID: Disabled
IPv6: Disabled
MLD: Disabled
Igmp: Disabled
NAT: Enabled
Firewall: Enabled
Status: Connected
IPv4 Address: 5.1.7.212
IPv6 Address: blank
Advanced Setup
Local Area Network (LAN) Setup
Configure DSL ROuter IP Address and Subnet Mask for LAN interface. GroupName: Default
IP Address: 192.168.1.1
Subnet Mask: 255.255.255.0
Enable IGMP Snooping (not ticked)
Enable LAN side firewall (not ticked)
Enable DHCP Server
Start IP Address: 192.168.1.2
End IP Address: 192.168.1.254
Lease Time (hour): 24
Primary DNS Server:192.168.1.1
Secondary DNS Server: 192.168.1.1
Static IP Lease List: (A maximum 32 entries can be configured) - Not configured
Enable DHCP Server Relay: (not ticked)
DHCP Server IP Address: blank
Configure the second IP Address and Subnet Mask for LAN interface: not ticked
Diagnostics
Test your LAN Connection: PASS
Test XDSL Synchronization: PASS
Test PPP server session: PASS
Test authentication with ISP: PASS
Test the assigned IP address: PASS
Ping default gateway: PASS
Ping primary Domain Name Server: FAIL
I am trying to get the branch office's streamyx DSL modem to work
I have read through the instructions from many other threads and set up the modem.
Now, I can access the modem from a PC, via LAN, and the following lights on the modem are green colour -
* Power Light
* LAN Light
* DSL Light
* Internet Light
None of them flashes, they just stay solid green
Does that mean the modem is working?
For some reasons, I still can't access the Net from a PC which connects to the modem
Enclose please find the info I copied from the modem, if you see anything that is wrong below, please tell me what is wrong and how to change it
Thank you !
---------------8<----------------------------------------------------
Board ID: DSL-2640B
Software Version: GE_1.07
Bootloader (CFE) Version: 1.0.37-5.12
Wireless Driver Version: 5.10.85.0.cpe4.402.1
Line Rate - Upstream (Kbps): 512
Line Rate - Downstream (Kbps): 1024
SNR Margin - Upstream (0.1 dB): 250
SNR Margin - Downstream (0.1 dB): 350
Attenuation - Upstream (0.1 dB): 25
Attenuation - Downstream (0.1 dB): 45
LAN IPv4 Address: 192.168.1.1
Default Gateway: 2.1.1.73
Premary DNS Server: blank
Secondary DNS Server: blank
LAN IPv6 Address: fe80::1
Default IPv6 Gateway: blank
Primary IPv6 DNS Server: 0.0.0.0
Secondary IPv6 DNS Server: 0.0.0.0
Date/Time: Sat Jan 1 00.02.44.2000
WAN Info
Interface: ppp0
Description: pppoe_0_0_35
Type: PPPoE
VlanMuxID: Disabled
IPv6: Disabled
MLD: Disabled
Igmp: Disabled
NAT: Enabled
Firewall: Enabled
Status: Connected
IPv4 Address: 5.1.7.212
IPv6 Address: blank
Advanced Setup
Local Area Network (LAN) Setup
Configure DSL ROuter IP Address and Subnet Mask for LAN interface. GroupName: Default
IP Address: 192.168.1.1
Subnet Mask: 255.255.255.0
Enable IGMP Snooping (not ticked)
Enable LAN side firewall (not ticked)
Enable DHCP Server
Start IP Address: 192.168.1.2
End IP Address: 192.168.1.254
Lease Time (hour): 24
Primary DNS Server:192.168.1.1
Secondary DNS Server: 192.168.1.1
Static IP Lease List: (A maximum 32 entries can be configured) - Not configured
Enable DHCP Server Relay: (not ticked)
DHCP Server IP Address: blank
Configure the second IP Address and Subnet Mask for LAN interface: not ticked
Diagnostics
Test your LAN Connection: PASS
Test XDSL Synchronization: PASS
Test PPP server session: PASS
Test authentication with ISP: PASS
Test the assigned IP address: PASS
Ping default gateway: PASS
Ping primary Domain Name Server: FAIL